Mon–Sun 8:00 AM – 9:00 PM · 24×7 emergency callouts
Festival lighting that stays beautiful through the season, wired safely for the long run.
Jhalar and decorative lighting transforms a home for festivals, but the joy fades fast if lights go dark mid-celebration or wiring becomes a seasonal hazard. We install decorative lighting properly — weatherproof connections, correctly loaded circuits, and a schedule that lets you enjoy the season without electrical worry.
Diwali, Navratri, weddings and festive seasons in Surat see a surge in decorative lighting, but most installations share the same problems: a tangle of extension boards, wires taped together and draped across balconies, and a load that pushes the circuit closer to its limit every year. What looks beautiful often sits one loose connection away from a short circuit, or one overloaded socket away from a tripped main during the evening Aarti when every light is on at once.
A proper jhalar installation starts not with the lights themselves but with the circuits that will carry them. We calculate the total wattage of every string, star, dome and decorative piece you plan to use, add a margin for the ones you will remember on the day, and decide whether your existing lighting circuit can carry it, whether a separate temporary circuit is needed, or whether the load should be spread across two MCB ways. Most jhalar failures are load failures — too many metres of LED on a circuit already running a dozen lights — and they are entirely avoidable.
The hardware matters as much as the wattage. Outdoor decorative lighting uses IP65-rated connectors, UV-stable cable that does not become brittle in Surat's sun, and proper junction boxes where runs join. We do not twist and tape connections and leave them exposed to the monsoon dew. We do not staple cable along a wall where the staple will pinch the insulation. We plan routes that keep cable off pedestrian paths, away from sharp edges, and out of reach of children and pets — the small details that turn a festive installation into a genuinely safe one.
Control is the part people appreciate most. We put jhalar lighting on its own switch or on a timer so the house lights up automatically at sunset and goes off at a sensible hour without anyone having to remember. We can also integrate decorative lighting with a dimmer or a smart switch for gradual fades and scene setting. The distribution board gets a clearly labelled way for the jhalar circuit, and the switch position goes somewhere convenient rather than hidden behind the A/C unit.
Removal is part of the service. After the festival or the season, we return within a day of your call, take everything down carefully, coil the cable without damaging it, and store connectors so they can be reused next year. The last thing anyone wants after Diwali is the exhaustion of un-tangling a hundred metres of decorative lighting that was never meant to be a permanent fixture.
The difference between a job that lasts and one you will be calling about again is almost always in the details below.
We total the wattage of your decorative lights and size the circuit and MCB accordingly, so the main does not trip when everything is switched on during the celebration.
IP65 connectors, UV-stable cable and proper glanding mean your installation survives the unpredictable Surat evenings without failure.
Set it and forget it — the lights come on at sunset and switch off after midnight automatically, with no daily switch operation or forgotten shutdowns.
Cable kept off walking paths, away from sharp edges and child reach, with no exposed joins or taped connections that could become unsafe.
No permanent damage to walls, balconies or gardens. Dismantling is part of the service so you don't have to deal with the post-festival mess.
Careful coiling and labelled storage preparation means your investment in decorative lighting serves you for years rather than needing replacement each festival.
Every step is the same whether the job is worth ₹400 or ₹95,000.
We walk your property, review the decorative lights you have, estimate the load, and discuss where you want each run positioned.
Total wattage calculated, existing circuit capacity checked, and a recommendation made on whether a dedicated or shared MCB way is appropriate.
A route plan is marked out with cable paths that are safe, visually clean and easy to dismantle after the festival.
UV-stable cable is run in proper containment, IP65 connectors used at all joins, and junction boxes installed where required.
Switch position chosen, timer or smart switch programmed to your preferred schedule, and the MCB way clearly labelled.
All lights switched on simultaneously, current draw verified, and the installation demonstrated to you before we leave.
Post-festival removal within 24 hours of your request, with cable coiled, connectors removed, and everything prepared for next season.
Indicative 2026 ranges. You always receive a firm, itemised price after inspection — and nothing starts until you approve it.
| Item | Indicative price |
|---|---|
| Jhalar lighting installation surveyWithin primary service area | Free |
| Dedicated jhalar circuit & MCB wayIncludes cable, MCB and labelling | ₹1,800 – ₹3,500 |
| Timer / smart switch installationPer circuit, electronic or smart | ₹1,200 – ₹3,200 |
| Outdoor IP65 connection setupPer connection point | ₹350 – ₹850 |
| Complex jhalar run installationMulti-floor, garden or large property | ₹3,500 – ₹8,500 |
| Post-festival dismantling & coilingDepends on run complexity | ₹800 – ₹2,500 |
| Complete jhalar setup (2 BHK flat)Includes circuit, timer and installation | ₹4,500 – ₹9,000 |
| Complete jhalar setup (bungalow)Includes circuit, timer and installation | ₹8,500 – ₹18,000 |
| Annual jhalar maintenance & reuse prepPre-festival inspection and testing | ₹1,200 |
Prices exclude civil repair and repainting where wall chasing is involved. Materials are charged at cost with original bills handed over, and there is no emergency markup on parts at any hour.
They drew a lighting layout before anything was cut and talked me out of the uniform downlight grid my carpenter had planned. Cove lighting, task light under the kitchen units, accent on the feature wall, all on separate switches. Completely different from what a standard fit-out would have given me. Worth every rupee.
Our new apartment's false ceiling was about to go up and we had no idea what lighting to choose. They produced a layout with warm cove lighting in the living room, task lights under the kitchen cabinets, and accent lights on the TV wall — all separately switched. Even helped us choose the right colour temperatures. Our guests always comment on how good the lighting is.
We wanted Diwali jhalar on our balcony and entrance but our MCB kept tripping every time we added more strings. They calculated the load, installed a dedicated circuit with a timer, and weatherproofed all outdoor connections. The lights turn on at sunset automatically and we haven't had a single trip. They also came back after Diwali to dismantle everything and coil it for storage.
The questions we are asked most often about this service, answered in full.
Same-day service in our primary area with no distance surcharge.
Tell us a little about the property and what you need. We will come back with an indicative figure and, where useful, arrange a free survey.
Survey within 24 hours, installation before festivals in our primary service area. Licensed* electricians, instrument diagnosis, and 1 year on installation workmanship.